30 kW Electric Heater

Product and application information

The 30 kW Electric Heater provides 15 and 30 kW operating stages so output can be matched to site demand. Its documented airflow of 2,350 m³/h distributes warm air through the space. As no fuel is burned inside the unit, it can be considered for controlled heating and drying in enclosed areas with suitable electrical infrastructure.

Electric operation provides temperature support without fuel storage or on-site refuelling. Planning should consider volume, ceiling height, insulation, air change, target temperature, operating time and the available 380 V electrical capacity together.

Enclosed-space and industrial applications

• Factories, workshops and assembly areasWarm air for maintenance shutdowns, non-production spaces, machinery installation and seasonal work zones without on-site fuel storage.
• Warehouses, hangars and logistics operationsWhole-space or zoned heating planned around door traffic, ceiling height and insulation where suitable 380 V infrastructure is available.
• Mosques, wedding venues and sports hallsTemporary heating in occupied enclosed spaces after planning unit quantity, sound, placement, power supply and warm-air direction.
• Exhibition tents, backstage areas and film setsUse in event, studio and temporary production spaces with suitable power distribution and protected cabling.
• Automotive, furniture and industrial coating workDrying or curing support within the paint, varnish or coating manufacturer's temperature and humidity limits; standard units are not suitable for solvent-vapour or explosion-classified zones.
• Concrete, screed, plaster, epoxy and flood dryingTemperature support within a measured plan that also manages air movement and dehumidification.
• Greenhouses, farms and poultry buildingsUse subject to electrical installation, moisture, dust, condensation, confirmed protection rating and livestock clearance.

Controlled drying and site conditions

The unit can provide temperature support for concrete, screed and coating-drying projects, while relative humidity and substrate moisture must be measured separately. For epoxy, paint and other coatings, the manufacturer's permitted temperature and humidity ranges must be maintained, and warm air should not be directed at sensitive surfaces. Air movement and dehumidification should be included where the drying plan requires them.

Before installation, the 380 V, 50 Hz supply, circuit capacity, protective devices and earthing must be verified by qualified electrical personnel. It must not be used in explosive atmospheres or wet environments beyond its confirmed protection rating. For food, feed, textile or packaging drying, temperature and airflow must be matched to the process, and warm air should not be directed at sensitive products.